Conair CC-10 Spécifications télécharger pdf (Page 10)

10

CLEANING THE GRATE ON THE DRIP TRAY

• The grate should be removed,

emptied and cleaned

frequently, particularly when

the drip tray is full.

• The grate

can be washed in

warm soapy water and rinsed thoroughly.

Use a non-abrasive washing liquid (do not

use abrasive cleaners, pads or cloths which

can scratch the surface).

CLE

A

NING THE DRIP TRAY

• The drip tray can be removed

after the grate is removed and

then cleaned with a soft,

damp cloth (do not use any

scouring agents or harsh

cleaners).

NOTE: Do not clean any of the parts or

accessories in the dishwasher.

CLE

ANING THE STEAM WAND

• The steam

wand should always be cleaned

after steaming milk.

• Wi

pe the steam wand with a

damp cloth, then with the

steam wand directed back

into the drip tray, momentarily

set the steam and hot water

control dial to the hot water

setting. This will release any

remaining milk from inside the

steam wand.

• Make

sure the steam and hot

water control dial is in the O

position. Press the power

button off, unplug the power

cord and allow the machine

to cool.

• If

the

steam wand remains

blocked, use pin to clear the

opening.

DECALCIFICATION

Decalcification refers to the removal of calcium

deposits that form over time on the metal parts

of the coffeemaker.

For best performance from your espresso

maker, decalcify the unit from time to time.

The frequency depends on the hardness of

your tap water and how often you use the

coffeemaker. To clean, fill the water reservoir to

capacity with a mixture of ¹∕

³

white vinegar and

²∕

³

water. Be sure the power button is in the off

position, and the unit is unplugged. Remove

the portafilter holder. Plug the machine back in,

and power the unit back on. Place a large

container under the brew head and steam

wand. When brewing temperature is reached,

the manual, one cup, and two cup buttons will

stop flashing. Press the manual button and

when your cup is filled with water; press the

manual button again, and let half of the

solution run through the brew head. Press the

steam button, and turn the steam/hot water

control dial to the left when the steam button

stops flashing, allow the remaining solution to

run through the steam wand. When the solution

stops running, turn the steam/hot water control

dial to the center position to stop. After

decalcifying, run one cycle of fresh cold water

through the unit before using the unit again to

brew coffee.

em200c_ib_BIL.indd 10 3/9/07 5:40:07 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Commentaires sur ces manuels

Pas de commentaire